Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

Topeak Presta Valve Extender
$12.99
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
SKS Digital Airchecker
$39.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS Pump Adapter with Chain
$10.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Problem Solvers Air-Bob Replacement Head
$11.99
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
Park Tool Emergency Tire Boot
$4.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
MSW ATB/Hybrid Mini Frame Pump
$20.00
The Airlift 200 is a single action bike pump that is compact enough to keep on hand anytime and anywhere. It has a large chamber to fill tires fast and a pump handle that locks in place for extra security. - Smart head fits on both Presta and Schrader valves - Compact, 5-inch hose extends for easier operation - Pump handle locks into place - Includes a frame mount and two 4mm bolts - Pumps up to 80 psi maximum pressure
MSW Airstream Pump
$20.00
The AirStream Inflator (INF-200) is MSW's ultra-small, minimalist compressed-air inflation device, featuring easy twist-on / twist-off operation and cartridge storage threads. - Composite body with alloy head - Plug to keep the cartridge interface clean - Simple twist on/off operation
MSW CO2 Cartridge: 20g (3-Pack)
$10.99
MSW threaded CO2 Cartridges fit all MSW inflator heads as well as other manufacturer's inflators.
MSW CO2 Cartridges
$10.99
MSW CO2 cartridges fit all MSW inflator heads as well as competitors' inflators. - 18 gram threaded cartridges - 3-pack
MSW Ride and Repair Kit w/Water Bottle Cage
$40.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
MSW Ride and Repair Kit with Seatbag and Airlift Mini Pump
$50.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount
MSW Ride and Repair Kit with Seatbag and CO2
$50.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
MSW Tool Hugger Kit
$50.00
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
MSW Windstream Twist Inflator Kit
$15.00 - $18.00
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
Crank Brothers Klic HV + CO2
$49.99
The high-volume portable hand pump with hidden magnetic hose and Co2 adaptor. - Premium pump with flexible rubber hose to allow for easy inflation - Features include a presta/schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle - Hv (high volume) version recommended for tires 1.8” wide and larger - All klic pumps come with a bottle cage bracket mount - Length: 220mm - Pressure: 110psi / 7.6 bar - Warranty: 5 years - Weight: 124g (pump only)
Blackburn CO2 3-Pack 25G Threaded
$19.99
Refills … get your refills here! - Threaded - 25 gram - 3-pack
Blackburn Chamber HV Floor Pump
$79.99
High-Volume Floor Pump Made For MTBs. Standard floor pumps go up to 150 psi and beyond—which is way more than you need for mountain bike tires. This one is purpose-built for MTBs. It has an oversized barrel that lets you quickly dial in tire pressure in precise increments, plus a supersized 4” gauge that's easy to see. - Oversized Pump Shaft For Extra Durability. - Pump Head Features Rugged Alloy Cap And Lever. - Super Long 47" Hose To Reach Valves In Stands Or Car Racks. - Convenient Integrated Hose Keeper On Handle. - Psi And Bar Increments On Gauge, With Vibrant Color Matched Background. - 50 Psi, 3.4 Bar Maximum
Blackburn Core 2 Floor Pump
$44.99
Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.
Blackburn Core 3 Floor Pump
$59.99
Perfect Pressure. Every Ride. At nearly 28 inches tall, the Core 3 towers over most floor pumps. The 48-inch-long hose is long enough to get air pressure to anywhere you could need it. Like the Pro, the Core 3 features our AirTap head that fits Schrader/Presta/Dunlop valves and has a pressure bleed button built in. We also integrated the easy to read, 3-inch gauge into the massive steel base of the Core 3 to help it have a rock solid stance. - Dimensions: 5.5 x 9 x 26.25 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Steel is real, strong - The base and barrel of the Core 3 are constructed of steel to withstand a lifetime of (ab)use. Air Bleed - Button on the pump head to micro-adjust pressure.
Blackburn Core CO2'Fer Thread-On Inflator
$19.99
Modulation is everything. That is the idea behind the Core CO2 inflator. The dial regulator allows you to crack a cartridge to get just enough CO2 into your tube/tire to get it to take shape and allow you to make sure everything is seated properly. Once you know you are good to go, open the valve all the way and let 'er rip. The minimal design is everything you need, and nothing you don't. - 19 grams - Presta valve only, works with most brands of threaded CO2 cartridge - Alloy construction
Blackburn Honest Digital Pressure Gauge
$27.99
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
Blackburn Honest Digital Shock Pump
$69.99
You’ve paid for full suspension, now it’s time to use all of it. When the trail gets steep and rough, can you tell the difference between 150psi and 170psi by pressing down on your saddle? No, you can't; and neither can we. The Blackburn Honest Digital Shock Gauge can. With pro shop-level precision, and a zero leak valve, the digital readout will ensure you put exactly the pressure you need in your shock. The days of "giving it a bounce in the lot" are over! - Accurate within 1% of pressure - Compatible with all thread on air shocks - Rated to 350 PSI/24 BAR Max - Shop precision quality - Zero leak valve - Replaceable battery - Auto on/off - Easy to read digital gauge - 215g
Blackburn Local Co2 Ride Kit
$49.99
Going for a ride but don’t know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else. - Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want - Wayside CO2 inflator with 16g cartridge - GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride - 2x tire levers
Blackburn Mammoth 2stage Anyvalve Mini Pump
$29.99
For almost two decades, the Mammoth has established itself as a well-known standard for mountain bike mini-pumps. And with the rubberized t-handle and AnyValve head that auto-adapts to Presta, Schrader, and Dunlop valves, it’s even better than its legendary forebears. - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internals - Tough, lightweight aluminum barrel - Rubberized folding t-handle - Includes cage mount - 90 psi max pressure - 157g / 0.34lbs
Blackburn Mammoth Co2fer Mini-Pump
$39.99
Blackburn's CO2fer Mini-Pump is a cleverly designed and fully functional mini pump that allows a CO2 cartridge to stow away inside and that can be quickly rearranged as a CO2 inflator. - Mini pump designed specifically for mountain bikes with 50 psi maximum - Blackburn 16g threaded CO2 cartridge included - 191g / 0.42lbs
Blackburn Mountain Anyvalve Mini-Pump
$14.99
Anyvalve pump head adapts to Presta, Schrader, and Dunlop valves. Details: - Rebuildable internals - Tough aluminum barrel - Ergonomic handle - Includes cage mount - 90 psi max pressure - 162g / 0.35lbs
Blackburn Piston 3 Floor Pump
$49.99
Massive Gauge, Bombproof Barrel Smart, Simple, Built To Last No more squinting or bending down low to see your tire pressure. The piston 3, with its massive 4" gauge, lets you dial in the precise pressure. And a tough steel barrel and base means you'll have this pump for years to come. - Pump head features rugged alloy cap. - Extra-long 37" hose to reach valves in stands or car racks. - Convenient integrated hose keeper on handle. - Psi And bar increments on gauge, with vibrant color matched background. - 160 psi, 11.0 bar maximum
Blackburn Wayside CO2 Thread-On Inflator
$16.99 - $18.00
- CNC alloy construction - Simple, proven spring loaded valve design - Presta & Schrader valve compatible - Accepts all threaded CO2 cartridges - 55 grams
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
Page 1 of 6 Next page