Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Nip 800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Nip features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6-18V on-board batteries such as Shimano or Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. Key features: - 800 lumen headlight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Taz 2000 is the latest evolution of Light & Motion's impressive Taz series. Featuring an unprecedented 2000 lumens from a compact, self-contained design; the versatile platform reinvents the capabilities of handlebar mounted lights. From technical singletrack to dark commutes — the Taz 2000 is the new benchmark of self-contained lighting. Featuring: - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs. - Sealed, waterproof design tested to 1 meter for all conditions reliability. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top two LEDs to penetrate the darkness with a far-reaching beam, without wasting any light. - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns. - Side lighting to maximize visibility on roadways with a dedicated button to toggle the side lights on/off. - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours. - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels. -Universal tool-free mounting system. - Micro-USB Rechargeable (Charges in 4 hrs with 2A adapter, 8 hrs. with 1A Adapter, and 14 hrs. with .5A USB slot). - Charge rate indicator illuminates the power button with three colors to display speed of charge. - Low battery warning and auto shut-off to prevent damage. Multiple power settings with cruise and secondary race mode: - High 1:30 / 2000 - Med 3:00 / 1000 - Low 6:00 / 500 - Pulse 9:00 / 500 - Race High 2:00 / 1500 - Race Low 4:00 / 750 - System weight: 216 grams
Conscientiously designed to provide class-leading output and unmatched protective visibility both day and night. An innovative feature set including powerful amber side lighting and daylight pulse mode creates the most visible, reliable, versatile headlight available. Featuring: - 900 Lumen Output (FL-1 Certified) With CREE LED - Daylight Visible Pulse Mode - Amber Side Lighting Increases Visibility at Intersections - High/Medium One Touch Toggle Mode - Micro-peened Reflector Creates A Smooth, Even Beam Pattern - Waterproof Design Provides All-Weather Reliability - Micro USB Rechargeable - Quick Release Handlebar Mount and GoPro Interface Included: - Quick Release Handlebar Mount, GoPro Interface, & Micro USB Charging Cable
Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights. - Includes mount, strap, allen key, and bolt
Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"
CatEyeSYNC - ONE touch control -Turn one light on and all your Sync lights come on. Using Wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. Check battery levels, customize modes , set brake mode function and synchronize flash pattern preferences using your Smartphone. Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. - When used with the other lights from the CatEyeSYNC family, SYNC Wearable gives you an extra way to be seen, day or night. Using the mobile app, SYNC Wearable can be synchronized with SYNC Core and SYNC Kinetic for 360-degree visibility. - Rechargeable wearable safety light - Clip-on bracket for easy installation to backpacks, saddle bags or clothing - Rubber strap bike mount included - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Li-polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - 6 modes - Mode memory function SPECS - Synchronize all SYNC lights - One touch turns all lights on/off - Synchronize light modes and flashing timing for enhanced visibility (SYNC Wearable, SYNC Kinetic) - Synchronized Kinetic mode for dynamic visibility (when used with SYNC Kinetic) - Control with smartphone app - Pair the lights (up to seven lights) - Customize light modes - View remaining battery level - Turn on/off the lights - Turn on/off synchronization with other lights - "Find me" function lets the light flashing by tapping the button on app
CatEyeSYNC - ONE touch control -Turn one light on and all your Sync lights come on. Using Wireless technology, CatEyeSYNC lights provide the ease of synchronizing all lights to operate as one. Check battery levels, customize modes, set brake mode function and synchronize flash pattern preferences using your Smartphone. Simple and superior 360-degree visibility is one touch away with up to 7 lights synced to operate as one. SYNC Core and Kinetic is the combo you need to get SYNCed. With 500 lumens and excellent side visibility, the SYNC Core gives you the power to see and be seen. Can be used alone or – better still – combined with other CatEyeSYNC enabled lights for unparalleled levels of 360-degree visibility, day or night. SYNC Kinetic gives you an extra level of defense with a built-in accelerometer that switches to burst mode as you decelerate. Use alone or in combination with other models in the CatEyeSYNC family for unparalleled levels of 360-degree visibility, day or night. CORE - Compact and lightweight high power rechargeable headlight (500lm) - Excellent daytime visibility in Daytime HyperConstant mode - Superior side visibility - Round beam pattern with OptiCube lens technology - Built-in fast recharging circuit - Li-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - 5 light modes * Charging time: 3-6 hrs - Mode memory function - FlexTight bracket - Optional helmet mount, center fork bracket and out-front bracket 2 available KINETIC - Built-in acceleration sensor for Kinetic mode (Automatically turns on with 50 lumen brightness when bike deceleration is detected) - Excellent daytime visibility in Daytime HyperFlash mode - Group Ride mode eye-friendly to team riders behind - Superior side visibility - OptiCube lens technology - Lithium Polymer rechargeable battery - USB rechargeable (Micro-USB cable included) - 6 modes *Charging time: 2.5h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low)
$17.99 - $19.99
Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time
Not too long ago, a 400 lumen headlight for this price would have been a pipe dream, but now the Blackburn DayBlazer 400 is a dream come true! Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g
Has Your Back, And Front, Day Or Night. Featuring eye-popping BLITZ daytime running mode to grab the attention of cars, IP-67 submersibility, and ample side visibility, the DAYBLAZER 400 puts light where riders need it most. Combined with 65 lumens on the rear DAYBLAZER 65, this combo is focused on safety, so you can focus on your ride. - 107 Grams (59 front, 48 rear) - 2 lithium polymer batteries included - Blitz 400 lumen, 1 hr runtime; low 200 lumen, 1.5 hr runtime; pulse 200 lumen, 6 hr runtime; strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - Solid 50 lumen, 1.6 hr runtime; high flash 65 lumen, 3 hr runtime; low strobe 35 lumen, 6 hr runtime - IP-67 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.
With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g
Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier. The Grid Side Beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. Designed to be mounted to either side of your fork with reusable silicone straps, the Grid Side Beacon can be used as a stand-alone light, or as part of our Luminate 360 Light Set. Spec'd with eye-catching amber-colored LEDs, the weatherproof, rechargeable Grid Side Beacon set comes with a dual-headed charger and has a runtime of up to 6 hours for multiple days of commuting illumination. - 58 grams - Charges via any standard USB port - ip-65 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. this light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. - High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.
Topeak's RedLite Aura gives you 1 high-flux piranha LED and 2 super-bright red LEDs to provide superb visibility for cars approaching from the rear. It mounts quickly and easily to Topeak racks and seatposts, and the included coin batteries deliver up to 120 hours of run time.
Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm
Portland Design Works' Spaceship 3 Headlight/Red Planet Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The Red Planet is a bright, budget-friendly tail light that burns with the power of five red LEDs. The Red Planet runs on 2xAAA batteries and has three modes: steady, blinking, and dance. The Stayputnik seat post mount, with a UV-proof rubber strap, is included. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing - Includes Mission Control 2.0 mount - Weatherproof exterior for all season riding - Weight: 91 g (3.2 oz) - Lifetime PDWarranty The Red Planet: - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz) - Lifetime PDWarranty
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Page 1 of 8 Next page