Brands We Carry

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"

The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.

The Cassidy Alloy Frame gives you the confidence to seek out the steepest, most technical trails out there. Its stiff and durable aluminum frame stands up to trail punishment, whether you're enjoying a full day of shuttle runs, barreling through rugged rock gardens, or hitting drops and gaps. 165 mm of Split Pivot rear suspension offers progressive travel for the stoutest trails, with superior pedaling efficiency and consistent braking traction to boot. Build it up and go big.

Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)

- Tailored to the latest lightweight and uber-capable trail bikes, the all-new Deluxe Ultimate offers a fully-checked damper design featuring Low Speed Compression adjustment and optimal traction control tuning. - Featuring the new DebonAir+ air spring with new air can options, a wider range of rebound adjustment, more tuning capabilities than ever before, and increased bushing overlap for improved small bump performance and grip.

If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep shit simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout

Tightly spaced knobs for dirt use - Bidirectional - Engineered for BMX tracks, trail riding, and dirt jumping - Front or rear - Full Square-knob design Staggered, tightly spaced center lugs provide control at speed. The knob spacing increases near the shoulder lugs to produce two channels that hook up on both hardpack berms and loose dirt on the trails.

Why We Make This: The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame’s headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That’s a problem we know how to solve. Why You Want It: Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with Open, 3T, All City, Low, Cinelli, Lynskey, and more. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 2.8-3.0mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

The Rincon combines a supple, breathable Synchwire upper with a robust nylon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D-molded footbed enhances comfort and fit, which is adjustable via a single BOA L6 dial featuring 1mm adjustment and an adjustable forefoot strap. It's a great choice for riders looking for reliable performance with outstanding value in off-road footwear. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Rubber reinforced heel and toe sections - Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - Die-cut EVA footbed with medium arch support Outsole: - Nylon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware Product weight - 340 grams (Size 42)

The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

- Bridging the gap between trail and XC race - Perfect for epic trail or technical XC race course

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

Once long ago, wool was the material of choice for cycling clothes and other active clothing. In the 80s, synthetics began to replace wool because they were new and shiny and stretchy and you could sublimate flashy, detailed graphics onto them which was a nifty thing for teams and shops. Even while synthetics enjoyed their era of dude-holding-the-bong popularity, however, wool did not die off. It still offered some really great features, like great moisture control and a resistance to putrescent reek. Our jerseys are an excellent example of wool done well. We've tried hard to produce something we hope will become your favorite piece of cycling clothing. Our long sleeve jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. Like our short sleeve jerseys they feature a full length zipper and a reinforced rear pocket with zippered access on both sides.

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

This sharp-looking flannel shirt blends comfort, style, and functionality. Keep warm with the insulated sleeves and a micro-fleece lining, and enjoy deluxe touches like button-snap closures.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.